Tutorial Enkapsulasi PPP dengan Autentikasi PAP – CHAP

Tutorial Enkapsulasi PPP dengan Autentikasi PAP – CHAP. Setelah sebelumnya kita telah membeberkan simulasi PPP autentikasi (PAP) - (CHAP).  Kali ini kami akan menjelaskan tutorial dengan packet tracer, simulasi tutorial enkapsulasi PPP dengan Autentikasi PAP dan CHAP. Untuk anda yang belum tahu, silahkan baca pengertian PPP PAP atau CHAP, 

Konfigurasi di router TIA

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface Serial2/0

Router(config-if)#ip address 192.168.3.2 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#hostname R1

R1(config)#username R2 password as

R1(config)#username R3 password as

R1(config)#interface serial 2/0

R1(config-if)#encapsulation ppp

R1(config-if)#ppp authentication pap

R1(config-if)#ppp pap sent-username R1 password as

R1(config-if)#

R1>enable

R1#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

R1(config)#interface FastEthernet0/0

R1(config-if)#ip address 192.168.102.1 255.255.255.0

R1(config-if)#no shutdown

R1(config-if)#exit

R1(config)#ip route 192.168.4.0 255.255.255.0 192.168.3.3

R1(config)#ip route 192.168.103.0 255.255.255.0 192.168.3.3

R1(config)#

R1#

Konfigurasi di router TIB

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface Serial2/0

Router(config-if)#ip address 192.168.3.3 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#interface Serial3/0

Router(config-if)#ip address 192.168.4.2 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#hostname R2

R2(config)#username R1 pass

R2(config)#username R1 password as

R2(config)#username R3 password as

R2(config)#interface serial 2/0

R2(config-if)#encapsulation ppp

R2(config-if)#ppp authentication pap

R2(config-if)#ppp pap sent-username R2 password as

R2(config-if)#exit

R2(config)#interface serial 3/0

R2(config-if)#encapsulation ppp

R2(config-if)#ppp authentication chap

R2(config-if)#

R2>ena

R2#conf t

R2(config)#ip route 192.168.102.0 255.255.255.0 192.168.3.2

R2(config)#ip route 192.168.103.0 255.255.255.0 192.168.4.3

R2(config)#

Konfigurasi di router TIC

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface Serial3/0

Router(config-if)#no shutdown

Router(config-if)#clock rate 64000

Router(config-if)#ip address 192.168.4.3 255.255.255.0

Router(config-if)#exit

Router(config)#hostname R3

R3(config)#username R2 password as

R3(config)#interface serial 3/0

R3(config-if)#encapsulation ppp

R3(config-if)#ppp authentication chap

R3(config-if)#exit

R3>enable

R3#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

R3(config)#interface FastEthernet0/0

R3(config-if)#ip address 192.168.103.1 255.255.255.0

R3(config-if)#no shutdown

R3(config-if)#

R3(config-if)#exit

R3(config)#ip route 192.168.3.0 255.255.255.0 192.168.4.2

R3(config)#ip route 192.168.102.0 255.255.255.0 192.168.4.2

R3(config)#


Begitulah rangkaian tutorial packet tracer point-to-point protocol menggunakan autentikasi Password Authentication Protocol (PAP) - Challenge Handshake Authentication Protocol (CHAP).

Jika ada pertanyaan, silahkan gunakan kolom komentar :)